Help

Overview

This editor talks to the A-Station the way the synth itself was designed to be remote controlled: every knob on the Program tab sends its parameter's MIDI CC or NRPN live, as you turn it, and whole programs, banks and the synth's global settings travel as SysEx dumps. It was built and tested with A-Station OS 2.1.02 (hold keypad 3 while switching the synth on to see its OS version).

Memory Protect. The A-Station ships with its global Memory Protect on, and while it's on the synth ignores anything that would store data — Write on the Program tab, and Send on the Global and Bulk Dump tabs. To switch it off, press MODE until the UTILITY LED lights, then press + (UNPROTECT) once; the LED above the FUNCTION switch lights to show writing is enabled. It's also on the Global tab.

MIDI

Choose your MIDI Input and Output ports and channels here — Output should be connected to the synth's MIDI IN, and an Input to the synth's MIDI OUT. The Output channel must match the synth's MIDI receive channel (channel 1 from the factory). Notes, pitch bend, aftertouch and program changes received on an Input channel are passed through to the Output channel as-is.

A second, optional Input port (Input2) with its own channel filter is available for setups with two MIDI sources — for example a controller keyboard on Input and the A-Station's own MIDI OUT on Input2. With the synth's MIDI OUT connected, turning a knob on the synth moves the matching control in the editor, and its value briefly shows in place of the knob's label. Set a port to None to disable it.

The Learned MIDI CC list shows every MIDI CC binding created with Learn MIDI CC (see the Program section), each with its CC number, the control it drives, and a × button to forget that one binding (or Clear to forget all of them at once). A binding to a multi-position control (LED buttons) also gets Absolute / Step buttons: Absolute maps the CC's 0-127 value onto the control's positions, while Step advances one position each time the bound button is pressed — useful for controllers that only ever send a fixed 0/127 pair. A new binding to an LED control starts in Step mode; switch it to Absolute for a knob or slider.

Global

The synth's global settings: MIDI channels, Local Control, MIDI clock, master tuning, velocity curve, memory protect, power-up program, external input and display options. These belong to the synth rather than to any program, so the editor keeps no copy of its own: the first time you open this tab it asks the synth for its current settings, and Request asks again.

Most settings take effect as soon as you change them, but only until the synth is switched off: the A-Station doesn't store a live change. Send writes all the global settings into the synth's memory at once, so they survive a power cycle — it needs Memory Protect off (see Overview), or the synth ignores it and blinks its MEM PROTECT LED. Power-up Bank / Program and Memory Protect have no live control at all, so they only reach the synth with Send. Changes made on the synth's own Global menu show up here as you make them; the synth stores those when you leave its UTILITY mode. Changing Receive Channel also moves the editor's own MIDI Output channel to match, so the synth keeps hearing the editor.

Save writes the global settings to a .syx file, and Load reads them back into the form — without sending them, so press Send when you actually want to restore them to the synth. Send and Save stay disabled until the synth's real settings have been received (or loaded from a file), so the editor's starting values — the A-Station's factory settings — can never overwrite your synth's real MIDI channels or Memory Protect by accident.

Program

The panel shows every parameter of the current program, grouped like the synth's own sections. Drag a knob up or down to turn it; with a knob focused (click it), the arrow keys step it by one and Home / End jump to its ends. Double-click a knob to reset it to its value in the A-Station's default program. While you hover over, focus or drag a knob, its label shows the current value. LED buttons work like the synth's switches: click the option you want.

Each section's Default pill resets that section's controls to the A-Station's default program, sending each change to the synth.

Load loads a program from a .syx file (see Auto send Program to synth below); a file with several programs, like a bank dump, goes to the Bulk Dump tab instead. Save writes the current program to a .syx file. Request loads the synth's current sound into the editor. Send sends the editor's program to the synth's edit buffer — it plays it, but doesn't store it.

Write stores the editor's program into the synth's memory, in the slot shown by the program selector next to it, then selects that slot on the synth (and, with Receive Program from synth on, reads it back). It needs the synth's Memory Protect off (see Overview).

The program selector shows and changes the synth's current program. Programs are numbered the way the A-Station numbers them — bank digit plus program, so 249 is Bank 2, program 49 (100-499). The arrows step through all 400; clicking the number opens the Select Program popup, with Bank 1-4 buttons and a grid of programs 00-99 (arrow keys move through the grid, Home / End to the start / end of the row and, pressed again, to 00 / 99, PageUp / PageDown change the bank, wrapping around from Bank 4 to Bank 1 and back, Esc closes it). Default programs (untouched init slots) show faded there when the Bulk Dump tab holds that bank.

Receive Program from synth: when on, a program the synth sends on its own (e.g. its front panel's "send current sound") replaces the editor's, and every program change — made here or on the synth — is followed by loading the new program's data, since the A-Station doesn't send it by itself. When off, the editor keeps what you're editing. Request always works either way.

Learn MIDI CC: when on, the next MIDI CC received on any Input binds to whichever control currently has focus — click a control, then move a knob or button on your MIDI controller. Turn it back off once you're done; existing bindings stay (see the MIDI tab). An LFO's Key Sync, Offset and Lock buttons are one setting on the synth's menu, so a CC learned on any of them drives all three together, stepping through the menu's six settings (– –, k –, k o, – L, k L, k O). The same goes for the Ext input buttons, Trigger Env and Send to FX: one CC steps through off, trigger, direct to effects, and both.

Auto send Program to synth: when on, a program loaded with Load is also sent to the synth right away; when off, it only updates the editor until you click Send.

Update Bulk Dump bank on Write: when on, Write also stores the program in the Bulk Dump tab's matching slot — even with no MIDI Output selected, so you can collect programs into banks offline and save them from the Bulk Dump tab.

Bulk Dump

This tab holds up to all four banks of the A-Station's memory (4 × 100 programs), shown as one grid per bank. Programs come from the synth (Request), from .syx files (Load), or from the synth's own front-panel bank dumps, which are captured whenever they arrive.

The toolbar's Save All, Request All, Send All and Clear All act on all four banks; each bank's own Load, Save, Request, Send and Clear pills act on that bank alone. Send writes the programs into the synth's bank of the same number, whatever bank the synth has selected (Memory Protect must be off); empty slots are skipped. Clear only empties the editor's copy — the synth isn't touched. Stop cancels a request or send in progress.

Load on the toolbar puts every program at the bank and slot stored in the file. A bank's Load pill puts a bank from the file into that bank instead, whatever bank it was saved from, replacing what's there; if the file holds several banks, a popup asks which one to import.

A file with a single program goes into one slot: the selected slot if there is one, otherwise the first empty slot (in that bank, for a bank's pill). Several files can be picked at once when no slot is selected: single-program files then fill empty slots one after another, in file-name order, and bank files (toolbar Load only) go to their own banks. Single-program and bank files can't be mixed in one go.

Click a program to play it — it's sent to the synth's edit buffer and loaded into the Program tab, with the program selector pointed at its slot, so Write puts an edited version back where it came from. Double-click it to edit it on the Program tab. Arrow keys move the selection through the bank one slot at a time, playing each program they land on (an empty slot is just selected); PageUp / PageDown move to the same slot in the next / previous bank, wrapping around from Bank 4 to Bank 1 and back, and Home / End move to the start / end of the row (pressed again, to the bank's first / last slot, 00 / 99). Click an empty slot to select it as the target for loading a single program.

The synth's front-panel "send current sound" (Utility KEY 7) sends a single program with no bank or slot of its own. While this tab is showing, it goes into the selected slot, replacing what's there; with no slot selected, it's not stored here.

Programs identical to the A-Station's default program — untouched init slots — are shown faded, and each bank's heading counts them.

Programs saved with an older A-Station OS (1.0.x) are converted by the synth when it receives them, so a bank sent to the synth and requested back may not match the original file exactly (for example, OS 2.1 resets Filter Overdrive in OS 1.0 programs). The editor keeps every program's own version information when sending, so the synth can do that conversion.